3-D Projection System - Lightspeed

Lightspeed Design HDs3D-1 Stereo Projector

The DepthQ® HDs3D-1 high-definition 3D projector is the 3rd generation of Lightspeed Design's patent-pending portable stereoscopic projectors, offering superior contrast, synchronization and crosstalk ("ghosting") for 3D professionals.

DepthQ Polarization Modulator - up to 30.000 ANSI lumen

The DepthQ® Polarization Modulator turns a 120Hz or 144Hz TripleFlash 3-D active stereo projector into a passive solution using a silver screen and Polarization Eyewear. The modulator is available in two sizes: Small, for projectors with apertures <3.87 inches, and Large, for projectors with apertures <6.75 inches. It is available pre-congured for either linear or circular polarization. The control unit is connected to the standard VESA miniDin3 sync output from your graphics card or projector and can be manually fine adjusted. For fixed installations an optional motorized slider is available.

Extras	Variations
Technology	combination of separate liquid crystal elements stacked together, enabling both high polarization eciency over visible wavelengths from 400 to 750 nm (predominantly achromatic spectral response
3D Stereo Support	miniDin3 VESA Stereo port (page-flip)
Transition polarization	120 Hz – 400 Hz (50 microsecond switching time)
Screen requirements	Silver coated for polarization reflection or polarization permeable with usage of back projection
Projector Brightness	up to 30.000 ANSI Lumens
Eyewear	linear or circular polarized glasses (depending on model)
Aperture dimensions (h x w)	Small Aperture: 3.875x2.41” (9.84x6.11cm) Large Aperture: 6.75x3.85” (17.15x9.78cm)
Screen Size	Based on projector brightness, from ~2 to 17.7 m (6 to 58 ft)
Power requirements	100 – 240VAC, 50/60Hz
Warranty	1 Year Warranty on Control box and Modulator

VRLOGIC GmbH . Am Bauhof 18 . 64807 Dieburg, Germany
Tel.:+49(0)6071 88139-0 . Fax.:+49(0)6071 88139-88 sales@vrlogic.com
Impressum

Display Technology - DMD:	DLP^® by Texas Instruments: 0.65" LVDS DDP2431 with BrilliantColor^TM
Native Resolution:	WXGA (1280x720)
Brightness: (max ANSI Lumens)	3D Mode: Up to 2700 Lumens depending on configuration 2D Mode: Approximately 3500 Lumens (standard mode) Approximately 2800 Lumens (eco mode)
Contrast Ratio:	2100:1 Typical
Stereoscopic Compatibility:	120 Hz vertical sync page flip active stereo
Delay:	8.33ms (one frame)
3D Aspect Ratios:	16:9 or 4:3
3D Compatibility:	WXGA (1280x720), XGA (1024x768), SVGA (800x600)
2D Compatibility:	NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / SECAM SDTV: 480i, 576i EDTV: 480p, 576p HDTV: 720p, 1080i, 1080p
3D V-Sync:	120Hz
3D H-Sync:	77-100kHz
2D V-Sync Range:	50-120Hz
2D H-Sync Range:	15-100kHz
Throw Ratios (approximate):	Minimum Throw Distance = Horizontal Screen Size * 1.5 Maximum Throw Distance = Horizontal Screen Size * 1.8
Image Offset (approximate):	115% Vertical (with a level projector, a 1 meter tall screen requires approximately 1.15 meters from lens centerline to top of screen)
Projection Methods:	Front Projection, Rear Projection, Ceiling Front, Ceiling Rear
Keystone Correction:	Automatic, +/- 30 degrees Vertical
Lamp Power:	High Bright: 280 Watts
Lamp Life^‡ :	High Bright: 3000 Hours Eco Mode: 4000 Hours